Announcement

Collapse
No announcement yet.

InWin AURORA FAN, RGB addressable is missing

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • sigmar31135
    started a topic InWin AURORA FAN, RGB addressable is missing

    InWin AURORA FAN, RGB addressable is missing

    Hi, I'm from Bangkok, Thailand and I bought a pack of Aurora fan from JIB(local distributor) but unfortunately there is no addressable RGB cable.
    i need to use this for control RGB lighting with asus sync.
    And how to connect it because it doesn't show in manual too.(https://www.in-win.com/media/fans/au...4028_73483.pdf)

    Please support me ASAP
    Thank You

  • Administrator_MD1
    commented on 's reply
    Hi Harlan220, all connection looks good, if you could check again and all cables are not loose, then maybe the control box is faulty. In this case, please kindly message us your shipping address & contact number, so we can arrange a replacement part of control box to you. Thank you for your patience.

  • Harlan220
    commented on 's reply
    Help would be great!

  • Harlan220
    replied
    Not sure if anyone has had a chance to look at this, but I am very interested in getting the lights working on the aurora light/fan pack.

    Leave a comment:


  • Harlan220
    replied
    Along with no lights, here is what the device manager says.

    Leave a comment:


  • Harlan220
    replied
    Connection to USB 2.0 LED Strip Connected together

    Leave a comment:


  • Harlan220
    replied
    Top- Down, (in on top out on bottom)top cable connects to LED strips Bottom cable runs to control

    Leave a comment:


  • Administrator_MD1
    commented on 's reply
    sorry for the time you spent, could you please take some photos of how you connect to your cables ? then we will have engineer to check for you.
    Thank you.

  • Harlan220
    replied
    After doing some investigating, I am actually quite sure I have hooked everything up accordingly. However when going into the device manager, it states (for a USB hub) that "Device Descriptor Request Failed". Also, opening the Aurora Software, when attempting to load the program it prompts me with "Not Get Device". I believe it may be possible that I have received damaged parts, or inoperable parts. Curious as to where I go from here, as I have purchased the Aurora pack last Thursday from "InWin" through Amazon. Now what?

    Leave a comment:


  • Harlan220
    commented on 's reply
    After doing some investigating, I am actually quite sure I have hooked everything up accordingly. However when going into the device manager, it states (for a USB hub) that "Device Descriptor Request Failed". Also, opening the Aurora Software, when attempting to load the program it prompts me with "Not Get Device". I believe it may be possible that I have received damaged parts, or inoperable parts. Curious as to where I go from here, as I have purchased the Aurora pack last Thursday from "InWin" through Amazon. Now what?

  • littlejeremy
    replied
    for a RGB motherboard with 4 pin , you just need to use the control box in your kit and all cables are included. I found this review which can give you more details : https://thinkcomputers.org/in-win-au...fans-review/3/ hope it helps.

    Leave a comment:


  • Harlan220
    commented on 's reply
    Is there an adapter of sorts?

  • littlejeremy
    commented on 's reply
    I forgot to mention AURORA pack has a control box, so it can work independently but not to sync with motherboard. I also think AURA Sync is very confusing because it doesn't explain which motherboards only support RGB or ARGB :-(

  • littlejeremy
    replied
    ASUS Prime X370 Pro only has 12V RGB 4-pin connector, but AURORA is addressable with 5V 3-pin ADD RGB connector. They are not the same.

    Leave a comment:


  • Harlan220
    replied
    Hello I have recently purchased this light pack to put onto an ASUS x370-pro. I didn't feel that the instructions were clear enough on installation and was left with the question of whether or not my Motherboard is compatible with the RGB header supplied. If there is a more detailed view on connecting the two, or if I am just going the wrong direction all together I would like to know either way. Thank you.

    USA, Kansas.

    Leave a comment:

Working...
X