InWin 909 questions

[orcinusdev]

1. Can Corsair AX1500i fit into InWin 909
2. Can we change the position of power button and outputs panel to the top where the cage is? (for floor positioning instead of desk)
3. Can we change the side of power button and outputs panel so we can place the tower to the left of user, not to the right only? (currently it's facing left side)
4. What is the best way to color the aluminium panel for customisation?

[Evil Duck]

1. Yes
2. Not without extensive modding, but everything is possible
3. Same as 2
4. Someone else will have to answer this one.

[orcinusdev]

1. Yes

I've found the answer for #4 and #2 and #3 are ok, but look what bothers me:

InWin 909 specs page:

PSII: ATX12V and EPS12V - Length: 220mm Maximum

Corsair AX1500i specs page: Dimensions
150mm x 86mm x 225mm


Yet I see AX1500i in some configs online. What bothers me if it is a modded one or it actually fits and InWin 909 spec is wrong?

Thank you.

[Administrator Johnny Gomez]

I've found the answer for #4 and #2 and #3 are ok, but look what bothers me:

InWin 909 specs page:

PSII: ATX12V and EPS12V - Length: 220mm Maximum

Corsair AX1500i specs page: Dimensions
150mm x 86mm x 225mm


Yet I see AX1500i in some configs online. What bothers me if it is a modded one or it actually fits and InWin 909 spec is wrong?

Thank you.

No worries, it will fit.

[khaledsmq]

@Johnny
@orcinusdev

1. Can Corsair AX1500i fit into InWin 909
2. Can we change the position of power button and outputs panel to the top where the cage is? (for floor positioning instead of desk)
3. Can we change the side of power button and outputs panel so we can place the tower to the left of user, not to the right only? (currently it's facing left side)
4. What is the best way to color the aluminium panel for customisation?

Did you manage to fit the AX1500I ?
how about the cables and power supply temperature i saw many photos that hardly fit i am worried about heat and cables bending

Thank you for advice.

[littlejeremy]

normally, company recommends a reasonable space for general users to install the components, because it's easy and safe (make sure the compatibility). But modders or professional users like to use customized cables, although it is very tight, but this PSU can still fit in if you use customized cables, like this one.

[littlejeremy]

or this one, you can see it's almost no space left after installing the PSU.